|
Rako Dimmer Module Ceiling 1200w----------------------
RRP:£164.00 (EX VAT)
|
Rako Dimmer Module Ceiling 1200w
Rako RDL1200C Product Overview
A compact 1200w RF dimmer designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 1200w of leading edge dimmable loads. Controlled from any Rako RAKOM RF device, for example the RCP07W push button RF wall plate.
Designed to fit in a ceiling void or cupboard, the RDL1200C inductive dimmer can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
The robust microprocessor design combines smooth reliable dimming with dynamic safety features such as auto-resetting over current, temperature shutdown and voltage surge protection.
Programmed using either an RCP07 RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus four preset scene levels in non volatile memory.
The RDL1200C dimmer can be controlled from any Rako transmitter such as RCP wallplates, RAH hand helds, MB1 timeclocks and forms the foundation of any Rako scene-set system.
- Dimensions: 160x50x36mm
- Input Supply: 230V AC +/-10% 50Hz
- Climate Range:
- Temperature +2C to +40C
- Humidity +5% to 95% non condensing
- Connections: 3 way screw terminals for mains power
- Protection:
- Auto resetting over current protection, Auto thermal shutdown, Voltage surge protection
- Load Types:
- Incandescent mains voltage lamps
- Tungsten halogen GU10 lamps
- Leading edge dimmable LV transformers
- Leading edge dimmable cold cathode
- minimum load 20w
- maximum load 1200w
- Communication: Rakom coded fm radio, 433.9MHz
- Memory: Flash memory (non volatile)
- Terminal Sizes:
- 1.5mm2 - Stranded
- 2.5mm2 - Solid
- Standards:
- EMC - EN 5001-1 :1992
- Immunity - EN 50082-1 :1997
If you are not entirely sure that you have selected the correct Rako equipment for your needs, please ring our customer service team on 0208 783 9995.
