UK Electrical Supplies

Free Delivery on orders over £75 ex VAT

Click Deco Victorian Polished Chrome 2 Gang 2 Way 100W Dimmer Switch with Polished Chrome Knobs

Product Code: VPCH162
Brand: Click Scolmore

Click Deco Victorian Polished Chrome 2 Gang 2 Way 100W Dimmer Switch with Polished Chrome Knobs Click Deco Victorian Polished Chrome 2 Gang 2 Way 100W Dimmer Switch with Polished Chrome Knobs Click Deco Victorian Polished Chrome 2 Gang 2 Way 100W Dimmer Switch with Polished Chrome Knobs
£ 35.45 ex VAT or £ 42.54 inc VAT
Please specify your product options

This 2 Gang 2 Way 100W Dimmer Switch (VPCH162) is a part of the Click Deco Range. A comprehensive range of decorative metal wiring accessories is now available under the single Deco brand. A brand that is synonymous with high quality, long life and unprecedented value for money. Each product is supplied individually packaged in its own distinctive printed box complete with comprehensive fitting instructions. Deco plates are manufactured from stainless steel, georgian style plates are manufactured from cast brass. Deco switches feature the same modular switch design as our moulded ranges. Unfurnished mounting plates can be ordered separately and furnished with whatever selection of switch modules may be required (Sold Separately).

  • Click Scolmore
  • Deco Victorian
  • Dimmer Switch
  • Style: Victorian
  • Finish: Polished Chrome
  • Gasket Colour: Supplied With Both Black & White Gasket
  • Gangs (Switches/Sockets/Modules): 2
  • Gang (Size): 1
  • Plate Dimensions (W) (mm): 88
  • Plate Dimensions (H) (mm): 88
  • Plate Dimensions (D) (mm): 8
  • Plate Dimensions (mm): 88 (W) x 88 (H) x 8 (D)
  • Dimensions With Gasket (mm): 91 (W) x 91 (H) x 9 (D)
  • Materials:
    • Front Plate & Control Button: Stainless Steel
    • Rear Housing: Nylon
    • Terminals: Brass
    • Terminal Screws: Steel & Yellow Passivated
    • PCB: Mixed Components
    • Earth Strap: Mild Steel
    • Gasket: Nylon
  • Rated Voltage (V~) (Ue): 250
  • Frequency (Hz): 50
  • Load Rating (W): 5 - 100
  • Load Rating Minimum (W): 5
  • Load Rating Maximum (W): 100
  • Load Rating Comments: Suitable For LED
  • Terminal Size (mm): Ø3.5
  • Terminal Torque Value (Nm): 0.25
  • Terminal Capacity - Solid (mm²): 2 x 1.5
  • Minimum Back Box Depth (mm): 25
  • Plate Fixing Centres - Horizontal (mm): 60.3
  • 2 Way Switch: Yes
  • Switch Control Type: Press - ON/OFF, Rotate - Dim
  • Dimmer Technology Type: Trailing Edge
  • Interchangeable Dimmer Modules:
    • MD9014: 100W Dual Mode LED Dimmer Module
    • MD9001: 6A Push ON/OFF (Dummy Dimmer / Non Dimmable) Module
    • MD9010: 1-10V Analogue Rotary Dimmer Module
    • MD9022: 40-250W Leading Edge Dimmer Module
    • MD9042: 60-400W Leading Edge Dimmer Module
  • Dimmer Load Compatibility: Suitable for LED dimmable light sources, Tungsten, Halogen, and Low Voltage. We recommend seeking advice with the lamp/luminaire manufacturer on whether the dimmer has been tested and are compatible with their product
  • Ingress Protection: IP20
  • Operational Temperature (°C): -5 to +40
  • Warranty (Years): 10
  • Warranty - Electronics (Years): 1
  • Standards: BS EN 60669-1, BS EN 60669-2-1, BS EN 55015, BS EN 61000-3-2
  • Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
  • For cleaning / polishing of products, use only a soft, dry, clean cloth.
  • UKCA Compliant: Yes
  • CE Compliant: Yes
  • CE LVD Directive: 2014/35/EU
  • CE RoHS Directives: 2011/65/EU & 2015/863/EU
  • CE REACH Directive: 1907/2006/EU
  • CE Packaging and Packaging Waste Directive: 94/62/EC
  • UKCA LVD Statutory Instruments: UK SI 2016 No. 1101
  • UKCA RoHS Statutory Instruments: UK SI 2012 No. 3032
  • UKCA Packaging and Packaging Waste Directive: UK SI 2013 No. 3113

Click Deco Victorian Polished Chrome 2 Gang 2 Way 100W Dimmer Switch with Polished Chrome Knobs

IP (Ingress Protection) Rating Guide
This product is IP20 rated

Bathroom zones diagram
Zone 0 Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1 Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2 60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3 Anything outside the other zones. No IP rating requirements.


  • Free 2 - 5 working days for UK Orders over £75.00 ex. VAT
  • £4.99 ex. VAT 2 - 5 working days for UK Orders under £75.00 ex. VAT
  • Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
    • We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

We offer a 14-day money-back guarantee on all items (excluding made to order items), provided they are returned in accordance with our Terms and Conditions.

For full returns and refunds information, please see our returns and refunds information page.

Details from the manufacturer


Gangs 2 Gang
Product Dimmer Switch
Qualifier Dimmer Switches
Switched/Unswitched Switched
Type LED
Ways 2 Way


Depth 8 mm
Fixing Centres 60.3 mm
Height 88 mm
Mounting Box Minimum Depth 25 mm
Width 88 mm


Flex Outlet N
Fuse Fitted N
Includes 13A Switch Socket? N
Includes RCD? N
Ingress Protection IP20
Lockable? N
Neon Indicator N
Pole Configuration Single Pole (1P)
RJ11 N
RJ45 Cat 5E N
RJ45 Cat 6 N
Satellite N
Screwless? N
Telephone Master N
Telephone Secondary N
TV Socket N
Wattage 5 | 100 W


CE Approved N
Standards BS EN 60669-1 BS EN 60669-2-1 BS EN 55015 BS EN 61000-3-2
Warranty 10 Years

Material & Finish

Body Material Stainless Steel
Face Colour Polished Chrome

Technical Data

Voltage 250 V
Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2024 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF