Click Deco Victorian Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs

Home

Click Stainless Steel Switches and Sockets with Black Inserts

Product Code: VPSS152
Brand: Click Scolmore

£ 27.93 ex VAT or £ 33.52 inc VAT

Sorry, this product is unavailable

Product Information
Downloads
IP Rating Guide
Delivery Info
Returns Policy

Click Scolmore
Deco Victorian
Dimmer Switch
Victorian style plate
Stainless steel finish
Supplied with black & white gasket
Leading edge dimmer technology
2 way switching
Push 'On' & 'Off' rotate to dim
Fits on to 25mm deep backbox
Style: Victorian
Finish: Stainless Steel
Gasket Colour: Supplied With Both Black & White Gasket
Gangs (Switches/Sockets/Modules): 2
Gang (Size): 1
Plate Dimensions (W) (mm): 88
Plate Dimensions (H) (mm): 88
Plate Dimensions (D) (mm): 8
Plate Dimensions (mm): 88 (W) x 88 (H) x 8 (D)
Dimensions With Gasket (mm): 91 (W) x 91 (H) x 9 (D)
Materials:
- Front Plate & Control Button: Stainless Steel
- Rear Housing: Nylon
- Terminals: Brass
- Terminal Screws: Steel & Yellow Passivated
- PCB: Mixed Components
- Earth Strap: Mild Steel
- Gasket: Nylon
Rated Voltage (V~) (Ue): 250
Frequency (Hz): 50/60
Load Rating (W): 60 - 400
Load Rating Minimum (W): 60
Load Rating Maximum (W): 400
Load Rating Comments: Suitable For Resistive / Inductive Loads
Terminal Size (mm): Ø3.5
Terminal Torque Value (Nm): 0.4
Terminal Capacity - Solid (mm²): 2 x 1.5
Termination Type: Screw
Minimum Back Box Depth (mm): 25
Plate Fixing Centres - Horizontal (mm): 60.3
2 Way Switch: Yes
Switch Control Type: Press - ON/OFF, Rotate - Dim
Dimmer Load Type: Resistive & Inductive
Dimmer Technology Type: Leading Edge
Interchangeable Dimmer Modules:
- MD9014: 100W Dual Mode LED Dimmer Module
- MD9001: 6A Push ON/OFF (Dummy Dimmer / Non Dimmable) Module
- MD9010: 1-10V Analogue Rotary Dimmer Module
- MD9022: 40-250W Leading Edge Dimmer Module
Dimmer Load Compatibility: Tungsten, Halogen, and Low Voltage may be suitable for use with some dimmable LED light sources. We recommend seeking advice with the lamp/luminaire manufacturer on whether the dimmer has been tested and are compatible with their product
Ingress Protection: IP20
Operational Temperature (°C): -5 to +40
Warranty (Years): 10
Warranty - Electronics (Years): 1
Standards: BS EN 60669-1, BS EN 55015, BS EN 61000-3-2, BS EN 61000-3-3
Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
For cleaning / polishing of products, use only a soft, dry, clean cloth.
UKCA Compliant: Yes
CE Compliant: Yes
CE LVD Directive: 2014/35/EU
CE RoHS Directives: 2011/65/EU & 2015/863/EU
CE REACH Directive: 1907/2006/EU
CE Packaging and Packaging Waste Directive: 94/62/EC
UKCA LVD Statutory Instruments: UK SI 2016 No. 1101
UKCA RoHS Statutory Instruments: UK SI 2012 No. 3032
UKCA Packaging and Packaging Waste Directive: UK SI 2013 No. 3113

Please Note: this dimmer is rated for tungsten loads and is not always suitable for use with LEDs. Check for compatibility with manufacturers before installation.

Click Deco Victorian Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs

This product is IP20 rated

View our full guide to IP Ratings.


Zone 0	Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1	Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2	60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3	Anything outside the other zones. No IP rating requirements.

DELIVERY OPTIONS

Free 2 - 5 working days for UK Orders over £ 75.00 ex. VAT
£ 4.99 ex. VAT 2 - 5 working days for UK Orders under £ 75.00 ex. VAT
Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
- We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

We offer a 14-day money-back guarantee on all items (excluding made to order items), provided they are returned in accordance with our Terms and Conditions.

For full returns and refunds information, please see our returns and refunds information page.

Details from the manufacturer

Description

Gangs	2 Gang
Product	Dimmer Switch
Qualifier	Dimmer Switches
Switched/Unswitched	Switched
Type	Leading Edge
Ways	2 Way

Dimensions

Depth	8 mm
Fixing Centres	60.3 mm
Height	88 mm
Mounting Box Minimum Depth	25 mm
Width	88 mm

Features

Flex Outlet	N
FM/DAB	N
Fuse Fitted	N
Includes 13A Switch Socket?	N
Includes RCD?	N
Ingress Protection	IP20
Lockable?	N
Neon Indicator	N
Pole Configuration	Single Pole (1P)
RJ11	N
RJ45 Cat 5E	N
RJ45 Cat 6	N
Satellite	N
Screwless?	N
Telephone Master	N
Telephone Secondary	N
TV Socket	N
USB	N
Wattage	60 \| 400 W

General

CE Approved	N
Standards	BS EN 60669-1 BS EN 55015 BS EN 61000-3-2 BS EN 61000-3-3
Warranty	10 Years

Material & Finish

Body Material	Stainless Steel
Face Colour	Stainless Steel

Technical Data

Voltage

250 V