Hamilton Sheer CFX Matt Black 1 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Matt Black Knob

Home

Switches and Sockets

Shop Switches & Sockets by Type

Dimmer Switches

Hamilton Sheer CFX Matt Black 1 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Matt Black Knob

Product Code: 8MBC1XLEDITB100
Brand: Hamilton

This is a made to order product with an extended lead time and is non-returnable. Please see the Delivery & Returns section below for more information.

Hamilton Sheer CFX Matt Black 1 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Matt Black Knob

RRP: £114.30 ex VAT

£ 62.62 ex VAT or £ 75.14 inc VAT

Please specify your product options

Options

Quantity

+ Add to Basket

We accept payments by Visa, MasterCard, PayPal (including PayPal Credit and PayPal Pay in 3) and Amazon Pay.

or enquire about this product

Estimated delivery: 10 - 14 working days

Product Information
Downloads
IP Rating Guide
Delivery Info
Returns Policy

Hamilton's innovative LEDITB100 range of LED dimmers offers 2 way switching and so much more. It's compatible with a diverse selection of dimmable lamps, ensuring smooth and quiet operation. You can use this clever dimmer in retrofit applications with standard 2 way rocker switches, making it perfect for large rooms with two entrances or lit staircases with switches at the top and bottom. It gives users the freedom to manually select their desired operating mode (trailing or leading edge) and can be fine-tuned for those tricky circuits with a mix of both types of LEDs. It also allows you to adjust your minimum settings and get your lighting just right.

Product range: Sheer CFX
CFX - Concealed fixing screws (i.e. screwless plate)
Plate finish: Matt Black
Plate material: Metal
Insert: Matt Black Knob
Trailing/leading edge push on/off intelligent LED dimmer switch
Gangs: 1
Wattage: 5 - 100 W (maximum 10 LED Lamps)
Current rating: 0.4 A
Voltage: 230 V AC
Mains frequency: 50 Hz
Ways: 2 Way
Minimum load: 5 W mains LED lamp
Maximum load: 100 W (maximum 10 LED Lamps)
Switched poles: Single
Trailing Edge and Leading Edge dimmer
Configurable minimum dimming level and dimming mode
Tungsten filament GU10 lamps must be branded with a fuse base
Compatible with incandescent lamps, mains halogen lamps, mains dimmable LED lamps, mains dimmable CFL lamps and dimmable LV electronic transformers
Two operating modes: Trailing Edge (100 W maximum) or Leading Edge (100 W maximum)
One-way and two-way switch for ON/OFF function (retrofit traditional dimmer)
Built in short circuit protection that, once activated, will suspend operation for 5 seconds
Soft start up and down feature helps to extend lamp life
Thermo Circuit protection activates and disconnects the dimmer if the temperature rises above 110 ° C - after cooling to below 75 ° C, the dimmer resumes normal operation
Set to Trailing Edge mode by default, but can be manually changed to Leading Edge mode
1 to 10 LEDs maximum
Plate size: Single
Plate width: 86 mm
Plate height: 86 mm
Plate depth: 1.5 mm plate + 3 mm gasket
Minimum wall box depth: 35 mm
CE marked
IP rating: IP2XD
Ambient operating temperature: -5 to +40 °C
Internal Use Only
Maximum installation altitude: 2,000 m
Face plate must be earthed
Terminal capacity:
- 2 x 1 mm²
- 2 x 1.5 mm²
Earth terminal capacity:
- 5 x 1 mm²
- 4 x 1.5 mm²
- 3 x 2.5 mm²
- 1 x 4 mm² Multi-strand
- 1 x 6 mm²
BS EN ISO standard(s): BS EN 60669-2-1

You can also browse Hamilton's full catalogue online. Seen something in there that you can't find on our website? Get in touch and we'll see what we can do.

Hamilton Sheer CFX Matt Black 1 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Matt Black Knob

This product is IP2X rated

View our full guide to IP Ratings.


Zone 0	Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1	Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2	60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3	Anything outside the other zones. No IP rating requirements.

Note: the lead time on this product is approximately 10 - 14 working days.

DELIVERY OPTIONS

Free 10 - 14 working days for UK Orders over £ 99.00 ex. VAT
£ 5.99 ex. VAT 10 - 14 working days for UK Orders under £ 99.00 ex. VAT
Free collection in 10 - 14 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
- We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

As this product is made to order, it is non-returnable.

For full returns and refunds information, please see our returns and refunds information page.

Details from the manufacturer

Description

Gangs	1 Gang
Product	Dimmer Switch
Switched/Unswitched	Switched
Type	Rotary
Ways	2 Way

Dimensions

Depth	1.5\|3 mm
Fixing Centres	60.3 mm
Height	86.0 mm
Mounting Box Minimum Depth	35 mm
Width	86.0 mm

Features

Flex Outlet	N
FM/DAB	N
Fuse Fitted	N
Includes 13A Switch Socket?	N
Includes RCD?	N
Ingress Protection	IP2XD
Lockable?	N
Mounting	Flush
Neon Indicator	N
Pole Configuration	Single Pole (1P)
RJ11	N
RJ45 Cat 5E	N
RJ45 Cat 6	N
Satellite	N
Screwless?	Y
Telephone Master	N
Telephone Secondary	N
TV Socket	N
USB	N
Wattage	100 W

General

CE Approved	N
Standards	BS EN 60669-2-1

Material & Finish

Body Material	Metal
Face Colour	Matt Black
Insert Colour	Matt Black
Rocker Colour	Black

Technical Data

Current Rating	0.4 A
Voltage	230 V