product
5337
5337
Hamilton GRID-IT 250W/210VA Multi-Way Trailing Edge Push On/Off Dimmer Module with Black Nickel Knob
Product Code:
IDTEBK
Brand:
Hamilton
This is a made to order product
and is non-returnable. Please see the Delivery & Returns section below for more information.
|
29.96
35.95
£
29.96
ex VAT or
£
35.95
inc VAT
|
- Product range: GRID-IT
- Insert: Black Nickel Knob
- Trailing edge push on/off dimmer module and knob kit
- Wattage: 250 W resistive/210 VA inductive
- Current rating: 1.1 A
- Voltage: 220/250 V AC
- Mains frequency: 50 Hz
- Ways: Multi-Way
- Minimum load: 25 W/25 VA
- Maximum load: 250 W resistive/210 VA inductive
- Switched poles: Single
- Trailing Edge technology dimmer - suitable for control of both resistive and inductive loads
- When used for dimming low voltage electronic halogen transformers, it must be noted that the dimmer controls the primary side of the transformer
- Tungsten filament GU10 lamps must be branded with a fuse base
- When using mains voltage halogen lamps, dimmers should be de-rated by 25%
- When dimming LED lamps, dimmers should be de-rated by 75%
- For further information on compatibility, please contact Hamilton's Technical department
- For multi-way switching, a push to make retractive switch should be installed in the other positions
- Module width: 23 mm
- Module height: 60.6 mm
- Module depth: 32.6 mm
- Minimum wall box depth: 35 mm
- CE marked
- IP rating: IP2XD
- Ambient operating temperature: -5 to +40 °C
- Internal Use Only
- Maximum installation altitude: 2,000 m
- Face plate must be earthed
- Terminal capacity:
- Earth terminal capacity:
- 5 x 1 mm²
- 4 x 1.5 mm²
- 3 x 2.5 mm²
- 1 x 4 mm² Multi-strand
- 1 x 6 mm²
- BS EN ISO standard(s): BS EN 60669-2-1
You can also browse Hamilton's full catalogue online. Seen something in there that you can't find on our website? Get in touch and we'll see what we can do.
Hamilton GRID-IT 250W/210VA Multi-Way Trailing Edge Push On/Off Dimmer Module with Black Nickel Knob
This product is IP2X rated
|
Zone 0 |
Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V. |
Zone 1 |
Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65. |
Zone 2 |
60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44. |
Zone 3 |
Anything outside the other zones. No IP rating requirements. |
DELIVERY OPTIONS
- Free 2 - 5 working days for UK Orders over £75.00 ex. VAT
- £4.99 ex. VAT 2 - 5 working days for UK Orders under £75.00 ex. VAT
-
Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
- We will contact you as soon as your order is ready for collection
For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.
Details from the manufacturer
Description
Product |
Dimmer Switch Module |
Switched/Unswitched |
Switched |
Type |
Trailing Edge |
Dimensions
Depth |
32.6 mm |
Height |
60 mm |
Width |
23 mm |
Features
Flex Outlet |
N |
FM/DAB |
N |
Fuse Fitted |
N |
Includes 13A Switch Socket? |
N |
Includes RCD? |
N |
Ingress Protection |
IP2XD |
Lockable? |
N |
Mounting |
Grid |
Neon Indicator |
N |
Pole Configuration |
Single Pole (1P) |
RJ11 |
N |
RJ45 Cat 5E |
N |
RJ45 Cat 6 |
N |
Satellite |
N |
Screwless? |
N |
Telephone Master |
N |
Telephone Secondary |
N |
TV Socket |
N |
USB |
N |
Wattage |
250 W |
General
CE Approved |
N |
Standards |
BS EN 60669-2-1 |
Material & Finish
Body Material |
Moulded Plastic |
Insert Colour |
Black |
Rocker Colour |
Black Nickel |
Technical Data
Current Rating |
1.1 A |
Voltage |
220/250 V |
x
Enquire about this Hamilton GRID-IT 250W/210VA Multi-Way Trailing Edge Push On/Off Dimmer Module with Black Nickel Knob