UK Electrical Supplies

Free Delivery on orders over £75 ex VAT

Hamilton Linea-Duo CFX Copper Bronze Frame/Copper Bronze Plate 1 Gang 1000W 2 Way Push On/Off Dimmer with Copper Bronze Knob

Product Code: LD1X1KCB-CB
Brand: Hamilton

This is a made to order product and is non-returnable. Please see the Delivery & Returns section below for more information.

Hamilton Linea-Duo CFX Copper Bronze Frame/Copper Bronze Plate 1 Gang 1000W 2 Way Push On/Off Dimmer with Copper Bronze Knob Hamilton Linea-Duo CFX Copper Bronze Frame/Copper Bronze Plate 1 Gang 1000W 2 Way Push On/Off Dimmer with Copper Bronze Knob
£ 63.22 ex VAT or £ 75.86 inc VAT
Please specify your product options

  • Product range: Linea-Duo CFX
  • CFX - Concealed fixing screws (i.e. screwless plate)
  • Frame finish: Copper Bronze
  • Plate finish: Copper Bronze
  • Plate material: Metal (2 part)
  • Insert: Copper Bronze Knob
  • Resistive leading edge push on/off dimmer switch
  • Gangs: 1
  • Wattage: 1,000 W (1 KW) resistive
  • Current rating: 4.16 A
  • Voltage: 220/250 V AC
  • Ways: 2 Way
  • Minimum load: 150 W
  • Maximum load: 1,000 W (1 KW) resistive
  • Switched poles: Single
  • Leading Edge technology dimmer
  • Tungsten filament GU10 lamps must be branded with a fuse base
  • When using mains voltage halogen lamps, dimmers should be de-rated by 25%
  • When dimming LED lamps, dimmers should be de-rated by 75%
  • For further information on compatibility, please contact Hamilton's Technical department
  • Plate size: Double
  • Plate width: 145 mm
  • Plate height: 86 mm
  • Plate depth: 4 mm
  • Minimum wall box depth: 35 mm
  • IP rating: IP2XD
  • Ambient operating temperature: -5 to +40 °C
  • Internal Use Only
  • Maximum installation altitude: 2,000 m
  • Face plate must be earthed
  • Terminal capacity:
    • 2 x 1 mm²
    • 2 x 1.5 mm²
  • Earth terminal capacity:
    • 5 x 1 mm²
    • 4 x 1.5 mm²
    • 3 x 2.5 mm²
    • 1 x 4 mm² Multi-strand
    • 1 x 6 mm²

You can also browse Hamilton's full catalogue online. Seen something in there that you can't find on our website? Get in touch and we'll see what we can do.

IP (Ingress Protection) Rating Guide
This product is IP2X rated


Bathroom zones diagram
Zone 0 Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1 Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2 60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3 Anything outside the other zones. No IP rating requirements.

DELIVERY OPTIONS

  • Free 2 - 5 working days for UK Orders over £ 75.00 ex. VAT
  • £ 4.99 ex. VAT 2 - 5 working days for UK Orders under £ 75.00 ex. VAT
  • Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
    • We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

As this product is made to order, it is non-returnable.

For full returns and refunds information, please see our returns and refunds information page.

Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2024 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF