UK Electrical Supplies

Free Delivery on orders over £75 ex VAT

Hamilton Linea-Tetra CFX Basalt Gray Frame/Basalt Gray Plate 2 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Basalt Gray Knobs

Product Code: LTX2XLEDITB100BG-BG
Brand: Hamilton

This is a made to order product and is non-returnable. Please see the Delivery & Returns section below for more information.

Hamilton Linea-Tetra CFX Basalt Gray Frame/Basalt Gray Plate 2 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Basalt Gray Knobs Hamilton Linea-Tetra CFX Basalt Gray Frame/Basalt Gray Plate 2 Gang 100W 2 Way Push On/Off Rotary Switching LED Dimmer with Basalt Gray Knobs
£ 116.67 ex VAT or £ 140.00 inc VAT
Please specify your product options

Free Delivery on this product!

Hamilton's innovative LEDITB100 range of LED dimmers offers 2 way switching and so much more. It's compatible with a diverse selection of dimmable lamps, ensuring smooth and quiet operation. You can use this clever dimmer in retrofit applications with standard 2 way rocker switches, making it perfect for large rooms with two entrances or lit staircases with switches at the top and bottom. It gives users the freedom to manually select their desired operating mode (trailing or leading edge) and can be fine-tuned for those tricky circuits with a mix of both types of LEDs. It also allows you to adjust your minimum settings and get your lighting just right.

  • Product range: Linea-Tetra CFX
  • CFX - Concealed fixing screws (i.e. screwless plate)
  • Frame finish: Basalt Gray
  • Plate finish: Basalt Gray
  • Plate material: Metal (2 part)
  • Insert: Basalt Gray Knobs
  • Trailing/leading edge push on/off intelligent LED dimmer switch
  • Gangs: 2
  • Wattage: 100 W (5 - 70 W per gang, max 10 LED lamps per circuit)
  • Current rating: 0.3 A per gang
  • Voltage: 230 V AC
  • Mains frequency: 50 Hz
  • Ways: 2 Way
  • Minimum load: 5 W mains LED lamp per gang
  • Maximum load: 70 W per gang (maximum 10 LED lamps per circuit)
  • Switched poles: Single
  • Trailing Edge and Leading Edge dimmer
  • Configurable minimum dimming level and dimming mode
  • Tungsten filament GU10 lamps must be branded with a fuse base
  • Compatible with incandescent lamps, mains halogen lamps, mains dimmable LED lamps, mains dimmable CFL lamps and dimmable LV electronic transformers
  • Plates with 2 or more dimmers must be de-rated to 70 W per gang
  • Two operating modes: Trailing Edge (100 W maximum) or Leading Edge (100 W maximum)
  • One-way and two-way switch for ON/OFF function (retrofit traditional dimmer)
  • Built in short circuit protection that, once activated, will suspend operation for 5 seconds
  • Soft start up and down feature helps to extend lamp life
  • Thermo Circuit protection activates and disconnects the dimmer if the temperature rises above 110 ° C - after cooling to below 75 ° C, the dimmer resumes normal operation
  • Set to Trailing Edge mode by default, but can be manually changed to Leading Edge mode
  • 1 to 10 LEDs maximum
  • Plate size: Single
  • Minimum wall box depth: 35 mm
  • IP rating: IP2XD
  • Ambient operating temperature: -5 to +40 °C
  • Internal Use Only
  • Maximum installation altitude: 2,000 m
  • Face plate must be earthed
  • Terminal capacity:
    • 2 x 1 mm²
    • 2 x 1.5 mm²
  • Earth terminal capacity:
    • 5 x 1 mm²
    • 4 x 1.5 mm²
    • 3 x 2.5 mm²
    • 1 x 4 mm² Multi-strand
    • 1 x 6 mm²
  • BS EN ISO standard(s): BS EN 60669-2-1

You can also browse Hamilton's full catalogue online. Seen something in there that you can't find on our website? Get in touch and we'll see what we can do.

IP (Ingress Protection) Rating Guide
This product is IP2X rated


Bathroom zones diagram
Zone 0 Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1 Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2 60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3 Anything outside the other zones. No IP rating requirements.

DELIVERY OPTIONS

  • Free 2 - 5 working days for UK Orders over £ 75.00 ex. VAT
  • £ 4.99 ex. VAT 2 - 5 working days for UK Orders under £ 75.00 ex. VAT
  • Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
    • We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

As this product is made to order, it is non-returnable.

For full returns and refunds information, please see our returns and refunds information page.

Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2024 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF