Heat Mat PipeGuard 22.5m

Designed to prevent frozen condensate pipes in the most extreme conditions, Heat Mat PipeGuard is a simple to fit solution which stops frozen, cracked and damaged pipes and ensures water keeps flowing.

Once installed Heat Mat PipeGuard automatically ensures heat is applied to the pipe when the temperature drops close to freezing, and switches off again to save energy once the pipe has reached a safe temperature. No maintenance is required and with its 10 year warranty you can be confident it will protect your pipes through the worst weather thrown at them.

The product is a ready made unit that simply connects to your power supply and is easy to install. PipeGuard features an integrated thermostat to ensure energy efficiency.

Technical Information

Length - 22.5 m

Application - Frost protection of metallic and non-metallic water pipes

Heating Element - Dual conductor constant Wattage heating wire

Voltage - 230V +/- 10%

Output Per Metre - 14 Watts

Output Range - 19 - 567 Watts

Amprating - 3 amp

Sensor - Integrated thermal sensor

Protection - 100% earth shielded

Fixings - Supplied with cable tie

The unit must be powered by an RCD protected supply, either from the boiler if suitable or from a separate 3amp rated fused spur. A drip loop should be introduced if the power supply is below any section of the heating cable.

Product Code - Heat Mat ACC-FRO-0300