UK Electrical Supplies

Free Delivery on orders over £75 ex VAT

Click Deco Plus Polished Brass 4 Gang 2 Way 10AX Toggle Switch with Polished Brass Toggles

Product Code: DPBR424
Brand: Click Scolmore

Click Deco Plus Polished Brass 4 Gang 2 Way 10AX Toggle Switch with Polished Brass Toggles Click Deco Plus Polished Brass 4 Gang 2 Way 10AX Toggle Switch with Polished Brass Toggles
£ 15.38 ex VAT or £ 18.46 inc VAT
Select from 7 available types

Please specify your product options:

Click Deco Plus Polished Brass 4 Gang 10AX 2 Way Toggle Switch

For premium decorative switches & sockets, look no further than Click’s Deco Plus range. Wiring accessories in this stunning collection, including the 4 Gang 10AX 2 Way Toggle Switch (DPBR424), feature finely rounded corners and your choice of sophisticated metallic finishes, like Polished Brass. From bedrooms to bathrooms and lounges to kitchens, this high quality range is sure to add a smooth modern feel to your décor no matter where you install it. The Deco Plus range is also modular, giving you the freedom to swap out existing switches for other modules from Click’s MiniGrid catalogue.

  • Click Scolmore
  • Deco Plus
  • Toggle Switch
  • Style: Rounded Profile
  • Finish: Polished Brass
  • Switch Finish: Polished Brass
  • Gasket Colour: Supplied With Both Black & White Gasket
  • Gangs (Switches/Sockets/Modules): 4
  • Gang (Size): 2
  • Plate Dimensions (W) (mm): 146
  • Plate Dimensions (H) (mm): 88
  • Plate Dimensions (D) (mm): 8
  • Plate Dimensions (mm): 146 (W) x 88 (H) x 8 (D)
  • Dimensions With Gasket (mm): 149 (W) x 91 (H) x 9 (D)
  • Materials:
    • Front Plate: Stainless Steel
    • Switch Front & Nut: Cast Zinc
    • Rear Housing: Nylon
    • Terminals: Brass
    • Terminal Screws: Steel & Yellow Passivated
    • Contacts: Silver "on-lay" Copper / Brass Internal Busbars: Formed Pressed Brass
    • Earth Strap: Mild Steel
  • Rated Voltage (V~) (Ue): 250
  • Frequency (Hz): 50
  • Load Rating (AX): 10
  • Load Rating Comments: Suitable for Inductive Loads
  • Terminal Size (mm): 4.9 x 4.1
  • Terminal Torque Value (Nm): 1.2
  • Terminal Capacity - Solid (mm²): 4 x 1.5 or 2 x 2.5
  • Termination Type: Screw
  • Minimum Back Box Depth (mm): 25
  • Plate Fixing Centres - Horizontal (mm): 120.6
  • Modular Rocker Switches: Yes
  • 2 Way Switch: Yes
  • Ingress Protection: IP20
  • Operational Temperature (°C): -5 to +40
  • Warranty (Years): 10
  • Standards: BS EN 60669-1
  • Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product.
  • Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
  • Intermediate toggle switches modules are available which interchange with the modules fitted. Order MD9125BR for polished brass finish.
  • For cleaning / polishing of products, use only a soft, dry, clean cloth.
  • UKCA Compliant: Yes
  • CE Compliant: Yes
  • CE LVD Directive: 2014/35/EU
  • CE RoHS Directives: 2011/65/EU & 2015/863/EU
  • CE REACH Directive: 1907/2006/EU
  • CE Packaging and Packaging Waste Directive: 94/62/EC
  • UKCA LVD Statutory Instruments: UK SI 2016 No. 1101
  • UKCA RoHS Statutory Instruments: UK SI 2012 No. 3032
  • UKCA Packaging and Packaging Waste Directive: UK SI 2013 No. 3113

Click Deco Plus Polished Brass 4 Gang 2 Way 10AX Toggle Switch with Polished Brass Toggles

IP (Ingress Protection) Rating Guide
This product is IP20 rated


Bathroom zones diagram
Zone 0 Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1 Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2 60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3 Anything outside the other zones. No IP rating requirements.

DELIVERY OPTIONS

  • Free 2 - 5 working days for UK Orders over £ 75.00 ex. VAT
  • £ 4.99 ex. VAT 2 - 5 working days for UK Orders under £ 75.00 ex. VAT
  • Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
    • We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

We offer a 14-day money-back guarantee on all items (excluding made to order items), provided they are returned in accordance with our Terms and Conditions.

For full returns and refunds information, please see our returns and refunds information page.

Details from the manufacturer

Description

Gangs 4 Gang
Product Plateswitch
Qualifier Toggle Switches
Switched/Unswitched Switched
Type Toggle
Ways 2 Way

Dimensions

Depth 8 mm
Fixing Centres 120.6 mm
Height 88 mm
Mounting Box Minimum Depth 25 mm
Width 146 mm

Features

Flex Outlet N
FM/DAB N
Fuse Fitted N
Includes 13A Switch Socket? N
Includes RCD? N
Ingress Protection IP20
Lockable? N
Mounting Flush
Neon Indicator N
Pole Configuration Single Pole (1P)
RJ11 N
RJ45 Cat 5E N
RJ45 Cat 6 N
Satellite N
Screwless? N
Telephone Master N
Telephone Secondary N
TV Socket N
USB N

General

CE Approved N
Standards BS EN 60669-1
Warranty 20 Years

Material & Finish

Body Material Stainless Steel
Face Colour Polished Brass
Rocker Colour Polished Brass

Technical Data

Current Rating 10 A
Voltage 250 V
Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2024 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF