UK Electrical Supplies

Free Delivery on orders over £75 ex VAT

Click Deco Plus Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs

Product Code: DPSS152
Brand: Click Scolmore

Click Deco Plus Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs Click Deco Plus Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs Click Deco Plus Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs
£ 30.95 ex VAT or £ 37.14 inc VAT

Click Deco Plus Stainless Steel 2 Gang 2 Way 400W Dimmer Switch

For premium decorative switches & sockets, look no further than Click’s Deco Plus range. Wiring accessories in this stunning collection, including the 2 Gang 2 Way 400W Dimmer Switch (DPSS152), feature finely rounded corners and your choice of sophisticated metallic finishes, like Stainless Steel. From bedrooms to bathrooms and lounges to kitchens, this high quality range is sure to add a smooth modern feel to your décor no matter where you install it. The Deco Plus range is also modular, giving you the freedom to swap out existing switches for other modules from Click’s MiniGrid catalogue.

  • Click Scolmore
  • Deco Plus
  • Dimmer Switch
  • Style: Rounded Profile
  • Finish: Stainless Steel
  • Gasket Colour: Supplied With Both Black & White Gasket
  • Gangs (Switches/Sockets/Modules): 2
  • Gang (Size): 1
  • Plate Dimensions (W) (mm): 88
  • Plate Dimensions (H) (mm): 88
  • Plate Dimensions (D) (mm): 8
  • Plate Dimensions (mm): 88 (W) x 88 (H) x 8 (D)
  • Dimensions With Gasket (mm): 91 (W) x 91 (H) x 9 (D)
  • Materials:
    • Front Plate & Control Button: Stainless Steel
    • Rear Housing: Nylon
    • Terminals: Brass
    • Terminal Screws: Steel & Yellow Passivated
    • PCB: Mixed Components
    • Earth Strap: Mild Steel
  • Rated Voltage (V~) (Ue): 250
  • Frequency (Hz): 50/60
  • Load Rating (W): 60 - 400
  • Load Rating Minimum (W): 60
  • Load Rating Maximum (W): 400
  • Load Rating Comments: Suitable For Resistive / Inductive Loads
  • Terminal Size (mm): Ø3.5
  • Terminal Torque Value (Nm): 0.4
  • Terminal Capacity - Solid (mm²): 2 x 1.5
  • Termination Type: Screw
  • Minimum Back Box Depth (mm): 25
  • Plate Fixing Centres - Horizontal (mm): 60.3
  • 2 Way Switch: Yes
  • Switch Control Type: Press - ON/OFF, Rotate - Dim
  • Dimmer Load Type: Resistive & Inductive
  • Dimmer Technology Type: Leading Edge
  • Interchangeable Dimmer Modules:
    • MD9014: 100W Dual Mode LED Dimmer Module
    • MD9001: 6A Push ON/OFF (Dummy Dimmer / Non Dimmable) Module
    • MD9010: 1-10V Analogue Rotary Dimmer Module
    • MD9022: 40-250W Leading Edge Dimmer Module
  • Dimmer Load Compatibility: Tungsten, Halogen, and Low Voltage may be suitable for use with some dimmable LED light sources. We recommend seeking advice with the lamp/luminaire manufacturer on whether the dimmer has been tested and are compatible with their product
  • Ingress Protection: IP20
  • Operational Temperature (°C): -5 to +40
  • Warranty (Years): 10
  • Warranty - Electronics (Years): 1
  • Standards: BS EN 60669-1, BS EN 55015, BS EN 61000-3-2, BS EN 61000-3-3
  • Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
  • For cleaning / polishing of products, use only a soft, dry, clean cloth.
  • UKCA Compliant: Yes
  • CE Compliant: Yes
  • CE LVD Directive: 2014/35/EU
  • CE RoHS Directives: 2011/65/EU & 2015/863/EU
  • CE REACH Directive: 1907/2006/EU
  • CE Packaging and Packaging Waste Directive: 94/62/EC
  • UKCA LVD Statutory Instruments: UK SI 2016 No. 1101
  • UKCA RoHS Statutory Instruments: UK SI 2012 No. 3032
  • UKCA Packaging and Packaging Waste Directive: UK SI 2013 No. 3113

Please Note: this dimmer is rated for tungsten loads and is not always suitable for use with LEDs. Check for compatibility with manufacturers before installation.

Click Deco Plus Stainless Steel 2 Gang 2 Way 400Va Dimmer Switch with Stainless Steel Knobs

IP (Ingress Protection) Rating Guide
This product is IP20 rated


Bathroom zones diagram
Zone 0 Inside the bath or shower tray. Minimum IP rating of IP67, and a maximum voltage of 12 V.
Zone 1 Directly above the bath to a height 225 cm from the floor, or the inside of shower cubicle excluding the tray. Minimum IP rating of IP65.
Zone 2 60 cm perimeter around the bath or shower to a height 225 cm from the floor. 60 cm radius around sink tap. Minimum IP rating of IP44.
Zone 3 Anything outside the other zones. No IP rating requirements.

DELIVERY OPTIONS

  • Free 2 - 5 working days for UK Orders over £75.00 ex. VAT
  • £4.99 ex. VAT 2 - 5 working days for UK Orders under £75.00 ex. VAT
  • Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
    • We will contact you as soon as your order is ready for collection

For full delivery details, see our delivery information page. You can also add one or more products to your basket, which will calculate the cost of delivery.

We offer a 14-day money-back guarantee on all items (excluding made to order items), provided they are returned in accordance with our Terms and Conditions.

For full returns and refunds information, please see our returns and refunds information page.

Details from the manufacturer

Description

Gangs 2 Gang
Product Dimmer Switch
Qualifier Dimmer Switches
Switched/Unswitched Switched
Type Leading Edge
Ways 2 Way

Dimensions

Depth 8 mm
Fixing Centres 60.3 mm
Height 88 mm
Mounting Box Minimum Depth 25 mm
Width 88 mm

Features

Flex Outlet N
FM/DAB N
Fuse Fitted N
Includes 13A Switch Socket? N
Includes RCD? N
Ingress Protection IP20
Lockable? N
Neon Indicator N
Pole Configuration Single Pole (1P)
RJ11 N
RJ45 Cat 5E N
RJ45 Cat 6 N
Satellite N
Screwless? N
Telephone Master N
Telephone Secondary N
TV Socket N
USB N
Wattage 60 | 400 W

General

CE Approved N
Standards BS EN 60669-1 BS EN 55015 BS EN 61000-3-2 BS EN 61000-3-3
Warranty 10 Years

Material & Finish

Body Material Stainless Steel
Face Colour Stainless Steel

Technical Data

Voltage 250 V
Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2024 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF