UK Electrical Supplies

Free Delivery on orders over £75 ex VAT

Hamilton Linea-Rondo CFX Copper Bronze with Copper Bronze Frame 1 gang 250W/210VA Multi-Way Touch Master Trailing Edge Dimmer

Product Code: LRX1XTMCB-CBB
Brand: Hamilton

Coronavirus (COVID-19) Delivery Delays: Please note that due to the current global situation, some orders may be delayed.

This is a made to order product with an extended lead time and is non-returnable. Please see the Delivery & Returns section below for more information.

RRP: £126.66 ex VAT
£ 67.65 ex VAT or £ 81.18 inc VAT

Estimated delivery: 4 - 6 weeks

Hamilton Linea-Rondo CFX Copper Bronze with Copper Bronze Frame 1 gang 250W/210VA Multi-Way Touch Master Trailing Edge Dimmer

  • Range - Linea-Rondo CFX
  • Product Type - Dimmers
  • Product Category - Trailing Edge Touch Dimmers
  • Plate Finish - Copper Bronze
  • Frame Finish - Copper Bronze
  • 1 gang 250W/210VA Multi-Way Touch Master Trailing Edge Dimmer
  • Standard Insert Colour - Black Nickel with a Black Surround
  • Switch Colour - Black Nickel
  • Body and Switch Trim Colour - Black
  • Plate Depth - 4.2mm
  • Nominal Plate Size - 91.4mm x 91.4mm
  • Minimum Wall Box Depth - 35mm
  • BS STD - BS EN 60669-2-1
  • Insert Type - Trailing Edge Touch Dimmer (resistive and inductive)
  • Wattage - 250W Resistive 210VA Inductive
  • Current Rating - 1.1 Amp
  • Voltage - 220/250V AC
  • Max Load - 250W Resistive 210VA Inductive Min Load 25W/25VA
  • IP Rating - IP2XD
  • Terminal Capacity 1 - 2 x 1mm²
  • Terminal Capacity 2 - 2 x 1.5mm²
  • Earth Terminal Capacity 1 - 5 x 1mm²
  • Earth Terminal Capacity 2 - 4 x 1.5mm²
  • Earth Terminal Capacity 3 - 3 x 2.5mm²
  • Earth Terminal Capacity 4 - 1 x 4mm² Multi-Strand
  • Earth Terminal Capacity 5 - 1 x 6mm²
  • Product Class 1 - Face plate must be earthed
  • Ambient Operating Temperature - -5° to +40°C
  • Recommended Location - Indoor use only
  • Maximum Installation Altitude - 2000m
  • BS EN ISO Standard - BS EN 60669-2-1
  • TRAILING EDGE TECHNOLOGY DIMMERS. Are suitable for control of both resistive and inductive loads. When used for dimming low voltage electronic halogen transformers it must be noted that the dimmer controls the primary side of the transformer. Tungsten filament GU10 lamps must be branded with a fuse base. When using mains voltagehalogen lamps- dimmers should be de-rated by 25%. When dimming LED lamps de-rated by 75% - please contact our Technical for compatibility. When using mains voltage halogen load transformer - maximum rating is 210VA. NOTE: For multi-way switching a push to make retractive switch should be installed in the other positions. (Note:standard two way switches will not work with this product)
  • Product code: LRX1XTMCB-CBB

The lead time on this product is approximately 4 - 6 weeks.

DELIVERY OPTIONS

  • Free delivery on UK Orders over £75.00 ex. VAT
  • Free collection from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
  • Saver delivery (2-5 working days) - £5.00 ex. VAT

For full delivery details, please click here.

RETURNS

As this product is Made to Order, it is non-returnable.

For full returns & refund information, please click here.

Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2020 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF