UK Electrical Supplies

Free Delivery on orders over £99 ex VAT

Heat Mat Demista 230V 33W 400x450mm Mirror Demister

Product Code: 7040L045
Brand: Heat Mat

Coronavirus (COVID-19) Delivery Delays: Please note that due to the current global situation, some orders may be delayed.
RRP: £47.00 ex VAT
£ 31.93 ex VAT or £ 38.32 inc VAT

Defog your bathroom mirrors with Heat Mat’s Demista 230V 33W 400x450mm Mirror Demister (7040L045). This clever device offers steam-free mirrors at an affordable price. It’s also made in the UK and covered by Heat Mat’s Lifetime Warranty, so you know you’re getting a product that you can count on. Whether you install it in a new-build, a refurb, or a hotel development, this mirror demister is sure to make a brilliant addition to any bathroom. 

  • Automatically ensures mirrors are clear of steam and can be used at all times
  • Uses up to 50% less power consumption than the leading alternative
  • Regularly used in hotels, new build and refurbishment projects
  • Ideal for bathrooms, ensuites, wet rooms and leisure facilities
  • Wide range of different standard 230V sizes to ensure a perfect fit
  • No thermostat required in standard installations
  • Mains voltage operation, removes the need for transformers
  • Independently BEAB approved
  • Manufactured in the UK by demista™
  • A 50cm by 50cm unit uses only 50 Watts of power per hour.

Technical Data

  • Heating Element: Carbon with copper connections
  • Supply Voltage: 230V +/- 10%
  • Power Output: 200W/m²
  • Housing: IP44
  • Insulation: Double insulated
  • Dimensions: 400x450mm
  • Coldtail lead: 1m 0.75mm² double insulated cable
  • Warranty: Lifetime
  • Product code: 7040L045

Further Info 

Selecting the Correct Sized Heater: Normally the Mirror Demister closest in size, but smaller than the mirror in question should be selected. The area covered will remain condensation free plus an additional margin around the edge of the mirror heater.

Combining Multiple Units: Multiple units can be combined to ensure complete coverage for the mirror in question. When units are combined there must be a 10mm gap between each heater, and they should be wired in parallel.

Coverage: Although a Mirror Demister is usually installed covering the majority of the mirror, there is no requirement for this to be the case and some people prefer the look of a smaller panel in the centre of the mirror to be clear, surrounded by an area of condensation. To obtain this effect, select a mirror heater significantly smaller than your mirror.

Simple Installation: Mirror Demisters have a self-adhesive backing enabling it to be easily attached to the reverse of a mirror. The mirror can then be affixed to the wall and the mirror heater can be covered with mirror adhesive, which must be solvent free. If being used with a safety-backed mirror the backing should be earthed, as should all metal parts surrounding the mirror.

Suitable for Nearly All Mirrors: Glass is a good conductor of heat and Mirror Heat is suitable for all recognised thicknesses of mirror. The thicker the mirror, the longer it will take for the heat to permeate. Care should be taken with mirrors that have cut-outs as the mirror will be weakened in that area. The possibility of weakness will be reduced if the corners of any cut-outs have radii.

Hotel Projects: Mirror Demisters are particularly suitable for use in hotel projects where it can be wired in through either the bathroom lighting system or the key-card operated circuit. Mirror Demisters are specified as standard in most new hotel complexes or refurbishments.

Wiring: Mirror demisters must not be run continuously; they can be wired through the lighting circuit, or to a separate switch if preferred. The circuit must be protected by a 5A fuse or circuit breaker, and the wiring circuit must contain an all pole disconnection. Mirror heaters are not suitable for use with power supplies controlled via a dimmer switch.

DELIVERY OPTIONS

  • Free (2-5 working days) delivery on UK Orders over £99.00 ex. VAT
  • Free collection from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches
  • Saver delivery (2-5 working days) - £5.00 ex. VAT

For full delivery details, please click here.

RETURNS

We offer a 14-day money back guarantee on all items*, provided they are returned in accordance with our terms in the link below.
* excluding made to order items

For full returns & refund information, please click here.

Click Here to Call Us Homepage Back to Top Your Account About UKES Delivery Returns & Refunds Terms & Conditions Privacy Policy Cookie Policy Copyright © 2021 UK Electrical Supplies. All Rights Reserved | Reg No: OC358458
UK Electrical Supplies, 5a Windmill Road, Hampton Hill, Middlesex, United Kingdom, TW12 1RF